文章最后更新时间:2024年02月15日
nps开源地址:https://github.com/ehang-io/nps/releases
一、安装nps服务端
1、服务器是amd的就下载这个
wget https://github.com/ehang-io/nps/releases/download/v0.26.10/linux_amd64_server.tar.gz
2、解压nps
tar -zxvf linux_amd64_server.tar.gz
3、安装nps
nps install
二、配置文件
1、打开配置文件
vi /etc/nps/conf/nps.conf
2、修改路径下/conf/nps.conf文件
appname = nps #Boot mode(dev|pro) runmode = dev #HTTP(S) proxy port, no startup if empty http_proxy_ip=0.0.0.0 http_proxy_port=80 #更改端口 https_proxy_port=443 #更改端口 https_just_proxy=true #default https certificate setting https_default_cert_file=conf/server.pem https_default_key_file=conf/server.key ##bridge bridge_type=tcp bridge_port=8024 bridge_ip=0.0.0.0 # Public password, which clients can use to connect to the server # After the connection, the server will be able to open relevant ports and parse related domain names according to its own configuration file. public_vkey=123 #Traffic data persistence interval(minute) #Ignorance means no persistence #flow_store_interval=1 # log level LevelEmergency->0 LevelAlert->1 LevelCritical->2 LevelError->3 LevelWarning->4 LevelNotice->5 LevelInformational->6 LevelDebug->7 log_level=7 #log_path=nps.log #Whether to restrict IP access, true or false or ignore #ip_limit=true #p2p #p2p_ip=127.0.0.1 #p2p_port=6000 #web web_host=a.o.com #绑定nps面板域名改这里 web_username=admin #修改用户名 web_password=123 #修改密码 web_port = 8080 #后台端口 web_ip=0.0.0.0 web_base_url= web_open_ssl=false web_cert_file=conf/server.pem web_key_file=conf/server.key # if web under proxy use sub path. like http://host/nps need this. #web_base_url=/nps #Web API unauthenticated IP address(the len of auth_crypt_key must be 16) #Remove comments if needed #auth_key=test #随便修改一下 auth_crypt_key =1234567812345678 #随便修改一下 #allow_ports=9001-9009,10001,11000-12000 #Web management multi-user login allow_user_login=false allow_user_register=false allow_user_change_username=false #extension allow_flow_limit=false allow_rate_limit=false allow_tunnel_num_limit=false allow_local_proxy=false allow_connection_num_limit=false allow_multi_ip=false system_info_display=false #cache http_cache=false http_cache_length=100 #get origin ip http_add_origin_header=false #pprof debug options #pprof_ip=0.0.0.0 #pprof_port=9999 #client disconnect timeout disconnect_timeout=60
3、重启nps
nps restart
4、如果没有更改8024端口记得开启防火墙才能打开nps面板
三、添加客户端
1、服务器ip:8080如果更改端口就输入你更改的端口
2、输入你更改后的账号密码
3、打开客户端,新增
备注(随便填)---Basic 认证用户名(可填可不填)---Basic 认证密码(可填可不填)----唯一验证密钥(不填会自动生成)---允许客户端通过配置文件连接(这里建议选否)---压缩(否)---加密(否)
然后点击新增,然后刷新一下会显示
4、点击创建的客户端然后找到创建的客户端左边有一个+号,点一下
然后复制客户端命令
四、安装本地设备客户端
1、下载客户端名字带有client就是客户端,这个根据你本地型号来定
1)amd64下载命令
wget https://github.com/ehang-io/nps/releases/download/v0.26.10/linux_amd64_client.tar.gz
2)arm64下载命令
wget https://github.com/ehang-io/nps/releases/download/v0.26.10/linux_arm64_client.tar.gz
3)Windows下载链接
https://github.com/ehang-io/nps/releases/download/v0.26.10/windows_amd64_client.tar.gz
4)docker拉库链接,后面的ip和密钥需要修改后再拉库
docker run -d --name npc --net=host ffdfgdfg/npc -server=127.0.0.1:8024 -vkey=123456 -type=tcp
2、解压nps
使用cd命令访问到下载目录
解压命令amd64
tar -zxvf linux_amd64_client.tar.gz
解压命令arm64
tar -zxvf linux_arm64_client.tar.gz
Windows用解压软件解压
3、运行npc
修改你的客户端命令,只需要在npc后面添加install即可,例如
./npc install -server=www.baidu.com:8024 -vkey=123456 -type=tcp
4、启动npc
npc start
然后打开nps找到客户端查看你的客户端是否显示在线
5、如需要添加自启就找到文件/etc/rc.local文件
下面放如上面输入的代码即可
./npc install -server=127.0.0.1:8024 -vkey=123456 -type=tcp
五、创建内网穿透端口
1、找到你的客户端,点击隧道
2、点击新增
模式(如果穿透端口就选择tcp隧道)---客户端ID(默认不用改)---备注(随便填)---服务器端口(穿透后访问的端口)---目标 (IP:端口)(内网要穿透的ip+端口)
然后点击保存
文章版权声明
1、本网站名字:小五四博客
2、本网站地址:https://blog.xiao54.com/
3、如发现链接失效,请联系我们我们会第一时间更新。
4、本站提供的一切软件、教程和内容信息仅限用于学习和研究目的,不得将上述内容用于商业或者非法用途,否则,一切后果请用户自负。
5、本站信息来自网络收集整理,版权争议与本站无关。您必须在下载后的24小时之内,从您的电脑或手机中彻底删除上述内容。
6、如果您喜欢该程序和内容,请支持正版,购买注册,得到更好的正版服务。如有侵权请邮件与我们联系处理。敬请谅解!转载或复制请以超链接形式并注明出处。
还没有评论,来说两句吧...